Skip to content

VELLWAX METALLIC

Vellwax Metallic Cera Wax

Vellwax Metallic protect, seal and polish your plaster surfaces while adding a metallic sheen to the finish. Our easily applied Vellwax metallic wax is water resistant, forming a protective layer on the surface. Keeping out moisture and other impurities, this wax also contains a faux metallic tint that adds an extra sparkle to the final appearance. Applied with a cloth or sponge in the same, simple way as Cera Clear Wax, it dries to an opaque finish. This finish can be buffed to a higher sheen, which accentuates the metallic effect. More than one metallic colour can be applied to a single surface to create unique effects that deliver exceptional possibilities for any interior.

Long Lasting

Long-lasting performance for enduring decorative wall finishes.

Easy To Apply

Easy-to-apply formulation for smooth and efficient application.

Water Resistant

Low VOC formulation for safer indoor air quality and healthier living spaces.

Easy Cleaning

Easy-clean surface for simple maintenance and lasting appearance.

 

Metallic Effect

Metallic effect finish that adds depth, shine, and modern elegance to walls.

 

Metallic CeraWax – Luxurious Wax with Shimmering Metallic Finish

Metallic CeraWax is a premium decorative wax formulated to enhance textured and plaster surfaces with a subtle metallic sheen. It adds depth, richness, and a soft reflective effect while also providing surface protection against moisture, stains, and wear. Ideal for feature walls and decorative finishes, Metallic CeraWax brings a touch of elegance and sophistication to modern interior spaces.

 
 
  1. Can be apply with soft cloth, sponges or trowel, rub off excess wax.
  2. Initially applies to an opaque finish, but can be buffed with soft cloth to increase the sheen.
  3. Buff off access wax with cloth or polish machine.
  4. Two tone metallic wax can be apply to plaster wall to achieve multicolor design.
  5. Apply Macoavell Vellwax clear wax after 24 hours to seal and protect.
12 fl oz covers approximately 80-100 square feet. Depending on surface porosity and texture.
DRYING TIME:
Approximately 24 hours depending on the kind of substrate and its absorption rate, in stable atmospheric conditions (T=25°C, UR=60%).

Surfaces to be finished must be clean, dry and free of wax, grease, scaling paint and mildew.